BX981K/BX995K Type Inverted Bucket with Bypass Valve Steam Trap Inlet National Standard

Model: BX980 Steam Trap, BX981 Steam Trap, BX982 Steam Trap, BX983 Steam Trap, BXC984 Steam Trap, BX985 Steam Trap

Caliber: 15～50MM    Connection Method: Thread    Operating Temperature: 0～230℃

Operating Pressure: 5K, 9K, 14K, 17K

Inverted Bucket Type with Bypass Valve Steam Trap Imported National StandardBX981K/BX995K Type Cast Iron Stainless Steel Steam Trap Brief Introduction

Cast Iron Inverted Bucket Type BX981K/BX995K Steam Trap *Maximum Pressure: 17kg/cm2 *Maximum Temperature: 230℃ Applicable Medium: Steam Nominal Diameter: DN15-DN50 Connection Method: Thread, Flange Material: Cast Iron *Maximum Discharge Capacity: 4500kg/hr

Detailed Information of Inverted Bucket Type Steam Trap BX981K/BX995K Type Cast Iron

Inverted Bucket Type with Bypass Valve Steam Trap BX981K/BX995K Type 17kg Steam Trap with Bypass Valve

BX981K-BX995K MOP 17K x 230℃       *Maximum Pressure: 17kg/cm²

*Maximum Temperature: 230℃ Applicable Medium: Steam Nominal Diameter: DN15-DN50

Connection Method: Thread, Flange Material: Cast Iron *Maximum Discharge Capacity: 4500kg/hr

Inverted Bucket Type with Bypass Valve Steam Trap Imported National StandardBX981K/BX995K Type Cast Iron Stainless Steel

K Series Cast Iron Inverted Bucket Type with Bypass Valve Steam Trap, while maintaining the original energy-saving and durable characteristics, reduces piping time, space, and pipeline leakage, has a smaller volume, and reduces the risk of personnel tripping. Resistant to water hammer and equipped with an anti-break water seal check valve, proven through three years of rigorous field testing, it has shown significant effectiveness in resisting water hammer and preventing water seal breakage, holding an absolutely leading position in the industry. The cast iron inverted bucket series comes with a three-year warranty. There is an inspection hole on the top cover, where an inspection valve can be installed; opening it immediately reveals whether the steam trap is functioning normally. Do not open the bypass valve during hot operation, as it may leak steam. It can discharge non-condensable gases throughout the operation. Strong resistance to back pressure, suitable for use in recovery systems. Not suitable for superheated steam. Accessories can be added according to customer requirements, and parts are supplied. Parts are made of stainless steel and hardened chrome steel valve seats, wear-resistant and corrosion-resistant. Large volume, not frost-resistant. Must be installed upright and cannot be tilted. Special specifications can be custom-made; please inquire.

Product Structure